2nd hand machines

Содержимое этой страницы доступно только на английском и французском языках. Перейти на английскую версию сайта. For the sake of viewer convenience, the content is shown below in this site default language. You may click one of the links to switch the site language to another available language.

Seeking to limit your equipment investment without compromising its availability and performance? Choose a VBSelect 2nd hand machine: we ensure an in-depth revision and modernise your future machine in our dedicated workshop, prior to installing it in your plant and training your operators, with the same care and quality of service as for a new machine. Telemaintenance along with a full range of preventive maintenance agreements and audits will ensure that your used machine delivers an availability rate comparable to a new installation.

Entrust us with your projects, together we will find the most appropriate solution for your needs!

FP 600 — HBP 360/704G

FP 600 — HBP 360/704G

Содержимое этой страницы доступно только на английском и французском языках. Перейти на английскую версию сайта. For the sake of viewer convenience, the content is shown below in this site default language. You may click one of the links to switch the site language to another available language.

Drilling sawing line for profiles FP 600 HBP 360/704 G, capacity 600 x 300 mm, commissioned in 1998, can be seen running in production at our Customer’s site:

— 6 Lateral storage and loading system, width 4 m; maximum length of the bar on the lateral storage: 18 m
— Infeed table: 22 m usable length with CNC carriage and gripper
— Drilling machine FP 600
— Band saw HBP 360/704 G with mitre cuts +/- 45°
— Outfeed conveyor, lenght: 24 m powered with hydraulic ejector in 2 areas

I'm interested in this machine
×
FP 800 CNC — HBP 430/854G

FP 800 CNC — HBP 430/854G

Содержимое этой страницы доступно только на английском и французском языках. Перейти на английскую версию сайта. For the sake of viewer convenience, the content is shown below in this site default language. You may click one of the links to switch the site language to another available language.

Drilling sawing line FP 800 – HBP 430/854 G, installed and commissioned in 1998, can be seen running in production untill the end of July 2019.

— Capacity : 800 mm x 340 mm
– 6 chains 4 m wide
– Infeed conveyor 18 m usable length with CNC carriage
– 3 spindle drilling unit FP 800
– Band saw HBP 430/854 G
– Outfeed conveyor 15.700 m usable length partly powered
– Unload hydraulic ejector

I'm interested in this machine
×

Содержимое этой страницы доступно только на английском и французском языках. Перейти на английскую версию сайта.

×